Primacoustic Offset Impaler Offset impaler adds 3.5 Inch air gap instock The C-Clamp is designed for

The C-Clamp is designed for light to medium duty hanging applications

The depth of the stand can be adjusted from 135 to 250 mm and the height from 380 to 585 mm

The stands are biased to keep all energy in alignment with the listening position

The entire bar can be screwed onto all standard microphone stands with a 3/8“ threaded connector

Primacoustic Offset Impaler Offset impaler adds 3.5 Inch air gap instock The C-Clamp is designed forThe Primacoustic Offset Impaler offers an effective method to increase bass absorption by introducing an air cavity behind a Broadway panel. This delivers as much as one extra octave of low frequency attenuation without any additional cost. The U shaped design is equipped with pivoting darts for left hand or right hand installations, thus allowing the same part to be used on either side of the panel. Front access holes provide easy access for a